OMNIS is made for large sample series: the OMNIS Sample Robot L enables the fully automated analysis of 175 samples (75 mL beakers) in a single run.

OMNIS comes with a patented Liquid Adapter making the exchange of reagents only a matter of seconds. Simply snap this Liquid Adapter onto the cap of the reagent bottle to connect the reagent in the bottle to your OMNIS Titrator.

Once the Liquid Adapter and the cap on the reagent bottle have been connected, OMNIS checks the reagent, preventing user errors.

Even when performing several different analyses simultaneously on your OMNIS System, there is no risk of confusion: simply assign particular parameters to dedicated work stations to make sure your most frequent analyses are organized in the most efficient and transparent way.

The OMNIS Liquid Adapter system makes exchanging reagents safer than ever. Bottles with hazardous liquids no longer need to be opened: simply snap this Liquid Adapter onto the cap of the reagent bottle. This closed handling system establishes a safe connection between the reagent and your OMNIS Titrator preventing accidental contact with hazardous liquids.

LEDs on the Titrator, Liquid Adapter, Stirrer, dTrode, Sample Robot, and Pump Modules communicate any failure or issue using a straightforward color code: red indicates «system error», orange indicates «waiting to connect», and green signals «system ready to go».

This color code is the basis for fast, reliable decision making. It helps you to ensure the reliability of your operations and the quality of the results you produce.

The OMNIS Liquid Adapter enables the exchange of reagents in 3 simple steps:

• Remove the Liquid Adapter from the empty reagent bottle
• Open the lid of the bottle cap on the new reagent bottle
• Snap the Liquid Adapter onto the bottle cap of the new reagent bottle

As soon as the reagent bottle and your OMNIS Titrator are connected, OMNIS identifies and checks the reagent against the specifications of the method you are going to perform.

This check prevents errors and provides full traceability of your results.

You can command your OMNIS System either via PC or a touch control unit. Either way, you only have to familiarize yourself with the software once, as it is the same for PC and touch control operation.

Got questions? OMNIS supports you with dedicated know-how. No more waste of time with searching and filtering. Tips and other helpful information are instantly displayed and are always context related.

In the hectic pace of everyday work in the laboratory, it can happen that a user introduces a sample into the titration cell but forgets to start the titration. In this case, conditioning continues until the water in the sample has reacted with the added iodine. Recalculation is not possible, the sample is lost, and the measurement must be repeated. With OMNIS, this will never happen again: Titration starts automatically after you have added the sample.

Karl Fischer titration with OMNIS is safe because the entire analysis takes place in a closed system. From filling the titration cells with solvent and performing the actual measurement to disposing of the sample after titration and preparing the cell for the next sample – with OMNIS, all of these steps are performed automatically.